(Summary description)Technical parameters of steel bar threading machine:

1. Equipment model sg-40ng

2. Processing range: φ 16 - φ 40

3. Roller parameters: 60 °× 3; 60 °× 2.5; 75 °× 3; 75 °× 2.5;

4. Working stroke: 80mm (effective length of rolling thread)

5. Reducer: bw3-436. Machine weight: 480KG, crown wheel, coal mine transportation equipment.



Operation steps of steel bar threading machine:

① The pipe is fixed on the bracket, and a certain length is reserved at the front end for threading.

② The die head matched with the pipe size is installed on the ratchet handle, and the threading machine is connected with the pipe.

③ Start threading: push the die head with the left hand and operate the handle with the right hand for several rounds to make the die head rotate clockwise (right hand thread).

④ After the die has been fed into the pipe for a circle, the left hand can be released, and the die can feed by itself depending on the grain on the die. At this time, some cutting oil can be added appropriately.

⑤ When the edge of the pipe is flush with the end of the die, stop threading.

⑥ At this time, adjust the ratchet handle to reverse, and slowly exit the die head from the pipe.

Our products have passed the market research, comprehensive innovation and site customer's layer upon layer control. The hydraulic system adopts ultra-high pressure (80MPa), low flow (5.42l / min) and low energy consumption (4kw). High precision, good performance, good quality, put on the market, by the majority of users praise!

• Categories:news
• Author:rebar couper
• Origin:http://www.rebarconnect.com
• Time of issue:2021-03-15
• Views:85266741