rebar coupler_thread rolling machine_Zhongjing Machinery Factory

PRODUCTS

Parallel threaded rebar coupler

Crimping rebar coupler

HGS-50A

Hand held steel bar bending machine

GW45-B Bench bar bender

Rebar coupler crimping machine

Autimatic threading system

Work wrench

PRODUCTION

Our company has advanced
technology and reasonable

CERTIFICATE

More than 10 years of
professional experience

TAILORED

We can customized individually for you

SERVICE

Efficient after-sales service.

Hengshui Zhongjing Machinery Equipment Co., Ltd.

Hengshui Zhongjing Machinery Equipment Co., Ltd. was established in 2009, is a company engaged in the production and sales of steel bar coupler after-sales service as one of the enterprises. Located in Anling Industrial Zone, Jingxian County, the factory covers an area of 3,000 square meters, has 200 employees, and has a marketing center and warehouse in Dongming Logistics Park, Hengshui.

VIEW MORE +

PROJECT CASE



How many companies produce cold extrusion sleeve in China?

How many companies produce cold extrusion sleeve in China? It can be said that there are really few cold extrusion sleeve manufacturers in China, but now people pay attention to service and quality. There are many Hengshui pure water-cooled extrusion sleeve factories, you can visit them on the spot, and then decide which one to use. Hengshui Zhongjing mechanical equipment Co., Ltd. produces and sells steel sleeve. It can have more information about the latest professional product parameters, real-time quotation, market quotation, wholesale of high-quality goods, suppliers and so on. The service attitude and production equipment are very complete. It is suggested that you can visit on the spot.

Beijing mentougou gymnasium

Beijing administration deputy center staff turnover housing project

NEWS

How many companies produce cold extrusion sleeve in China?

How many companies produce cold extrusion sleeve in China? It can be said that there are really few cold extrusion sleeve manufacturers in China, but now people pay attention to service and quality. There are many Hengshui pure water-cooled extrusion sleeve factories, you can visit them on the spot, and then decide which one to use. Hengshui Zhongjing mechanical equipment Co., Ltd. produces and sells steel sleeve. It can have more information about the latest professional product parameters, real-time quotation, market quotation, wholesale of high-quality goods, suppliers and so on. The service attitude and production equipment are very complete. It is suggested that you can visit on the spot.

2021-03-26

When is the positive and negative wire (bidirectional) steel sleeve used

When is the positive and negative wire (bidirectional) steel sleeve used In the construction process, when the supporting beam, wall column and transfer floor are finished, a steel bar has been fixed by concrete, and the tail of the movable steel bar turns and cannot rotate 360 degrees, it is necessary to use the positive and negative wire (two-way) sleeve. First, screw the sleeve into 2-3 threads at one end of the positive wire of the steel wire head, then align the steel bar to be connected with one end of the negative wire sleeve, and return 1-2 threads at the rotating sleeve, At this time, the reinforcement on both sides are screwed into 1-2 threads, and then the reinforcement wrench is used to rotate the socket to complete the installation.

2021-03-22

How to use steel bar threading machine

Technical parameters of steel bar threading machine: 1. Equipment model sg-40ng 2. Processing range: φ 16 - φ 40 3. Roller parameters: 60 °× 3; 60 °× 2.5; 75 °× 3; 75 °× 2.5; 4. Working stroke: 80mm (effective length of rolling thread) 5. Reducer: bw3-436. Machine weight: 480KG, crown wheel, coal mine transportation equipment. Operation steps of steel bar threading machine: ① The pipe is fixed on the bracket, and a certain length is reserved at the front end for threading. ② The die head matched with the pipe size is installed on the ratchet handle, and the threading machine is connected with the pipe. ③ Start threading: push the die head with the left hand and operate the handle with the right hand for several rounds to make the die head rotate clockwise (right hand thread). ④ After the die has been fed into the pipe for a circle, the left hand can be released, and the die can feed by itself depending on the grain on the die. At this time, some cutting oil can be added appropriately. ⑤ When the edge of the pipe is flush with the end of the die, stop threading. ⑥ At this time, adjust the ratchet handle to reverse, and slowly exit the die head from the pipe. Our products have passed the market research, comprehensive innovation and site customer's layer upon layer control. The hydraulic system adopts ultra-high pressure (80MPa), low flow (5.42l / min) and low energy consumption (4kw). High precision, good performance, good quality, put on the market, by the majority of users praise!

2021-03-15

How much is a reinforced straight thread sleeve

How much is a reinforced straight thread sleeve In addition to the straight thread sleeve connection, there is another connection method for the reinforcement sleeve connection, that is, the reinforcement sleeve cold extrusion connection. This kind of connection uses a special cold extrusion sleeve to connect the reinforcement together through the cold extrusion machine. The reinforcement connection sleeve manufacturers must operate correctly. The position of the middle joint should not be pressed, and the indentation should be kept in one line In a straight line, The cold extrusion sleeve is a kind of processing method that puts the metal blank in the cold extrusion die cavity, applies pressure to the blank through the punch fixed on the press at room temperature, and connects the steel bar with the sleeve, which makes the metal blank produce plastic deformation. advantage: 1. It has strong adaptability to reinforcement and can be constructed without prefabrication in advance. 2. The quality of the joint is stable and reliable, and the performance of the joint can easily meet the requirements of class I in Yb 9250-93 standard. Disadvantages: 1. The labor intensity of on-site construction is high, and three people are needed for operation. 2. The material is large and the cost is high. 3. It is not suitable for high density reinforcement. 4. The hydraulic oil pollutes the steel bar, so it is troublesome to clean it.

2021-02-28

We can customize products for you to meet different building standards in various countries

Thanks to our engineers for the continuous improvement of our products over the years

we have achieved brilliant achievements today

We advocate prefabricated buildings that are environmentally friendly

efficient, and easy to install

Parallel threaded rebar coupler

Crimping rebar coupler

HGS-50A

Hand held steel bar bending machine

GW45-B Bench bar bender

Rebar coupler crimping machine

Autimatic threading system

Work wrench

How many companies produce cold extrusion sleeve in China?

Beijing mentougou gymnasium

Beijing mentougou gymnasium

Beijing administration deputy center staff turnover housing project

How many companies produce cold extrusion sleeve in China?

When is the positive and negative wire (bidirectional) steel sleeve used

How to use steel bar threading machine

How much is a reinforced straight thread sleeve