news_news_Hengshui Zhongjing Machinery Equipment Co., Ltd.

NEWS

03-26 

How many companies produce cold extrusion sleeve in China?

How many companies produce cold extrusion sleeve in China? It can be said that there are really few cold extrusion sleeve manufacturers in China, but now people pay attention to service and quality. There are many Hengshui pure water-cooled extrusion sleeve factories, you can visit them on the spot, and then decide which one to use. Hengshui Zhongjing mechanical equipment Co., Ltd. produces and sells steel sleeve. It can have more information about the latest professional product parameters, real-time quotation, market quotation, wholesale of high-quality goods, suppliers and so on. The service attitude and production equipment are very complete. It is suggested that you can visit on the spot.

03-22 

When is the positive and negative wire (bidirectional) steel sleeve used

When is the positive and negative wire (bidirectional) steel sleeve used In the construction process, when the supporting beam, wall column and transfer floor are finished, a steel bar has been fixed by concrete, and the tail of the movable steel bar turns and cannot rotate 360 degrees, it is necessary to use the positive and negative wire (two-way) sleeve. First, screw the sleeve into 2-3 threads at one end of the positive wire of the steel wire head, then align the steel bar to be connected with one end of the negative wire sleeve, and return 1-2 threads at the rotating sleeve, At this time, the reinforcement on both sides are screwed into 1-2 threads, and then the reinforcement wrench is used to rotate the socket to complete the installation.

03-15 

How to use steel bar threading machine

Technical parameters of steel bar threading machine: 1. Equipment model sg-40ng 2. Processing range: φ 16 - φ 40 3. Roller parameters: 60 °× 3; 60 °× 2.5; 75 °× 3; 75 °× 2.5; 4. Working stroke: 80mm (effective length of rolling thread) 5. Reducer: bw3-436. Machine weight: 480KG, crown wheel, coal mine transportation equipment. Operation steps of steel bar threading machine: ① The pipe is fixed on the bracket, and a certain length is reserved at the front end for threading. ② The die head matched with the pipe size is installed on the ratchet handle, and the threading machine is connected with the pipe. ③ Start threading: push the die head with the left hand and operate the handle with the right hand for several rounds to make the die head rotate clockwise (right hand thread). ④ After the die has been fed into the pipe for a circle, the left hand can be released, and the die can feed by itself depending on the grain on the die. At this time, some cutting oil can be added appropriately. ⑤ When the edge of the pipe is flush with the end of the die, stop threading. ⑥ At this time, adjust the ratchet handle to reverse, and slowly exit the die head from the pipe. Our products have passed the market research, comprehensive innovation and site customer's layer upon layer control. The hydraulic system adopts ultra-high pressure (80MPa), low flow (5.42l / min) and low energy consumption (4kw). High precision, good performance, good quality, put on the market, by the majority of users praise!

2

...

34

冀ICP备14014192号-3 Powered by 300.cn

CONTACT US

Email: hszjjx@163.com
Tel: 156 1488 3666
Tel: 0318-2882666
Fax: 0318-2189118
Address: No. 209, South 1st Area, Logistics Enterprise Management Co., Ltd., Dongming Village, Taocheng District

留言应用名称：

Customer message

描述：

* Message contents：

Name：

E-mail：

* 验证码：